Transportation And Storage; Electrical Diagram - Royal Catering Rcds-38/5 Bedienungsanleitung

When connected to power, the
heating indicator is on but it does
not heat up.
When connected to power, rotate
the thermostat, the heating
indicator is on but the
temperature is out of control.
When connected to power, it
heats up normally, but the
indicator is off.
Neither the indicator nor the
heating elements work.
The aforementioned issues are provided for reference only. If any failure occurs, please stop using the device
immediately and contact professional technicians for inspection and repair.

Transportation and Storage

• During transportation, handle the appliance with care and avoid placing it upside down to prevent damage
to the enclosure and internal components. The packaged device should be stored in a well-ventilated
warehouse free of corrosive gases. If temporary storage is necessary, ensure protective measures are
taken.
• Do not move the device alone. At least two people are required to move the device together to avoid
damage or accidents. Moving it alone may cause the steam cabinet to be damaged.
• Do not stack three or more devices. Stacking them may cause the devices to fall, leading to damage and
potential injuries.
Disposing of Used Devices
Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device recycling
and collection point. Check the symbol on the product, instruction manual and packaging. The plastics used to
construct the device can be recycled in accordance with their markings. By choosing to recycle you are making a
significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.

Electrical Diagram

EN
1. The thermostat is defective.
2. At least one heating element is
burnt out.
The thermostat is defective.
The indicator is malfunctioning.
1. The power supply is abnormal,
and the device is not connected to
power.
2. The fuse is burnt out.
Food display steam cabinet
1. Replace the thermostat.
2. Replace the burnt-out heating
elements.
Replace the thermostat.
Replace the indicator.
1. Check all the connections of the
power cord to ensure normal
power supply.
2. Replace the fuse.