Smartwares RM 250 Montage-, Bedienungs- Und Sicherheitshinweise Seite 65

Press and hold the test button
brief muted alarm signal sounds. The signal is switched
off as soon as the test button
signal is triggered by pressing the test button
the smoke detector
is the case, please contact the service partner.
CAUTION! Never test the smoke detector
by holding the device over an open flame!
There is a hazard of damaging the device
and setting flammable materials on fire.
CAUTION! Due to the loud volume of
the smoke detector (85 decibels), you
should stand at an arm's length from the
device when testing the smoke detector. If the smoke
detector sounds an irregular/low tone, it means that
there is a defect.
pressed until the
1
is released. If no alarm
1
does not work properly. If this
2
, then
1
GB/IE 65