Scheppach 7906100717 Originalbetriebsanleitung Seite 20

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new device brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise your-
self with your device and to use it for its intended purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must be
read and carefully observed by all operating personnel
before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
20 | GB
2. Device description (Fig. 1)
1. Adjustment screw
2. Compressed air connection
3. Torque control
4. Trigger
5. Oil filler hole
6. Direction selector pin (for clockwise/anticlockwise
rotation)
7. Square drive
The following parts are designated as accessories:
8. Extension attachment
9. Plug nipple
10. Machine oil
11. Lubricator
12. Allen key
13. Socket attachments
3. Scope of delivery
• Compressed air impact screwdriver
• Extension attachment
• Plug nipple
• Machine oil
• Lubricator
• Allen key
• Socket attachments
• Operating manual
4. Proper use
This air-powered impact screwdriver is suitable for
easy loosening and tightening of screw connections
during assembly or repair work and for loosening bolts
when changing wheels.
The machine may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Persons who operate and maintain the machine must
be familiar with it and must be informed about potential
dangers.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the machine.
www.scheppach.com