Atlas Copco QMC41-100-I06 Sicherheitshinweise Seite 7

QMC41-100-I06
NOTE So-called "click" torque wrenches do not check
for potentially dangerous over-torqued conditions.
• Do not use hand sockets. Use only power or impact sock-
ets in good condition.
• Ensure that the workpiece is securely fixed.
Operating hazards
• Operators and maintenance personnel must be physically
able to handle the bulk, weight and power of hand-guided
fixtured tools. Be ready to counteract normal or sudden
movements, use both hands.
• Guard against electric shock. Avoid body contact with
earthed or grounded surfaces (e.g. pipes, radiators, other
electrical machinery). There is an increased risk of elec-
tric shock if your body is grounded.
• Immediately after performing adjustments or programme
changes, check for correct operation.
• When working with hand-guided fixtured tools, maintain
a balanced body position and secure footing.
Workplace hazards
• Slip/Trip/Fall is a major cause of serious injury or death.
Cluttered areas and benches invite injuries.
• Daily check hooks, shackles, chains and mounting points
used for suspending fixtured tools. Do not use if cracked,
worn or damaged.
• Do not expose electric power tools to rain. Do not use in
damp or wet conditions. Water entering a power tool will
increase the risk of electric shock.
• High sound levels can cause permanent hearing loss and
other problems such as tinnitus. Use hearing protection as
recommended by your employer or occupational health
and safety regulations.
• Repetitive work motions, awkward positions and expo-
sure to vibration can be harmful to hands and arms. If
numbness, tingling, pain or whitening of the skin occurs,
stop using tool and consult a physician.
• Proceed with care in unfamiliar surroundings. Be aware
of potential hazards created by your work activity. This
tool is not insulated from coming into contact with elec-
tric power sources.
• This tool and its supply unit are not recommended for use
in potentially explosive atmospheres.
Signs and Stickers
The product is fitted with signs and stickers containing impor-
tant information about personal safety and product mainte-
nance. The signs and stickers shall always be easy to read.
New signs and stickers can be ordered by using the spare
parts list.
© Atlas Copco Industrial Technique AB - 9834 3502 00
Useful Information
ServAid
ServAid is a portal that is continuously updated and con-
tains Technical Information, such as:
• Regulatory and Safety Information
• Technical Data
• Installation, Operation and Service Instructions
• Spare Parts Lists
• Accessories
• Dimensional Drawings
Please visit: https://servaid.atlascopco.com.
For further Technical Information, please contact your local
Atlas Copco representative.
Caractéristiques techniques
Conditions environnementales normales
Ce produit est conçu pour fonctionner en toute sécurité
dans les conditions suivantes :
• Utilisation à l'intérieur
• Jusqu'à 2 000 m au-dessus du niveau de la mer
• Température de fonctionnement de +5 °C / +41 °F à +40
°C / +104 °F
• Température de stockage de -25 °C / -13 °F à +60 °C /
+140 °F
• Humidité relative maximum de 80 % pour des tempéra-
tures maximales de 31 °C / 89 °F avec une diminution li-
néaire jusqu'à 50 % d'humidité relative à 40 °C / 104 °F
• Fluctuations maximales de la tension d'alimentation sec-
teur de ±10 % de la tension nominale
• Surtensions transitoires jusqu'au niveau de la surtension
catégorie II
• Surtensions temporaires se produisant sur l'alimentation
secteur
• Degré de pollution 2
• Indice de protection : IP20
Données produit
Tension du moteur
Puissance du moteur
Régime
Plage de couple
Poids
Déclarations
Responsabilité
De nombreux événements dans l'environnement d'exploitation
peuvent affecter le processus de serrage et nécessiteront une
validation des résultats. Conformément aux normes et règle-
Safety Information
24 V d.c.
145 W
2000 tr/min
25 - 100 Nm (2.2 - 8.9 in lb)
0.61 kg (1.36 lb)
7