Troubleshooting; Spare Parts - Eberth Ak1-Rb305 Bedienungsanleitung

Model
Material
Weight
Roller diameter
Dimensions
Maximum material width
Maximum material thickness steel
Maximum material thickness aluminum
Sizes of the wire bearing grooves
Table 1
Error/fault
The round bending machine
is not working.
The round bending machine
does not bend the material
correctly.
The round bending machine
does not bend the materials
as specified in the catalog.
You can find popular spare parts on our website in the "Spare parts" category:
https://www.rocket-tools.de/Ersatzteile/?mpn=AK1-RB305
https://www.rocket-tools.de/Ersatzteile/?mpn=AK1-RB610
https://www.rocket-tools.de/Ersatzteile/?mpn=AK1-RB1000
https://www.rocket-tools.de/Ersatzteile/?mpn=AK1-RB1300
EN V. 1.1
AK1-RB1300
Steel rollers, cast iron body and steel base
approx. 210 kg
75 mm
1640 x 400 x 440 mm
1300 mm
0,75 mm
1,4 mm
6,5 mm / 8 mm / 1 1 mm

Troubleshooting

Possible cause
The mechanism is defective. Check the mechanics and
The material thickness could
be wrong.
The wrong material has
been inserted.
The material thickness could
be wrong.
The mechanics are faulty.

Spare parts

Solution
contact the dealer.
observe maximum sheet
thickness.
Only insert the correct
material.
Check the material to be
bent.
Contact the dealer.
15