Assembly - Eberth Ak1-Rb305 Bedienungsanleitung

Attach the machine:
• Ensure that the machine is installed on a level surface with suitable lighting.
• Make sure that there is enough space for the hand crank to turn.
• Use the four fixing holes in the base plate of the machine to mount it securely. (Fig. 2)
• Use suitable fasteners that are suitable for the surface (floor or work surface).
After installation, check that all screws are tight.
Test the crank arm rotation to ensure that there is sufficient clearance
is present and the machine is stable.
Remove the hand crank:
• Loosen the locking screw.
• Remove the hand crank from the guide
roller.
• Reverse the position of the crank arm
unit and retighten the locking screw.
8

Assembly

Fig. 2
Locking screw
Fig. 3
V. 1.1 EN