Cleaning And Care; Cleaning; Maintenance; Repair - Parkside Performance Passp 12-Li A1 Bedienungsanleitung

m CAUTION! Risk of injury and
damage to property!
Apply minimal pressure when working.
u
Work at a constant speed.
u
Never use the same sand paper
u
sanding different materials (e.g. wood
followed by metal). Optimum sanding
results can only be achieved by using
clean sand paper.
Guide the product over the workpiece
u
in parallel. Use overlapping sanding
motions.
After completing the task: Lift the product
u
from the workpiece. Switch the product
off.
˜ Cleaning and care
WARNING! Risk of injury!
m
Always switch the product off,
remove the battery pack
let the product cool down before
making any adjustments.
˜ Cleaning
NOTE
Do not use chemical, alkaline, abrasive
u
or other aggressive detergents or
disinfectants to clean this product as they
might be harmful to its surfaces.
Never allow fluids to get into the product.
Always keep the product clean, dry and
o
free from oil or grease.
After each use and before storage: Remove
o
debris from the product.
Regular and proper cleaning helps to
o
ensure safe use and prolongs the life of the
product.
Cleaning the product
Clean the product with a dry cloth.
o
Use a soft brush for areas that are hard to
o
reach.
32 GB/IE
In particular, clean the air vents after every
o
use with a cloth and soft brush. The vents
must always be clear.
Cleaning the dust box
(Fig. F, G)
for
[ ]
For a thorough cleaning: Open the dust
o
box
Use a slotted screwdriver to push the
o
clip
of the dust box
thoroughly.
˜ Maintenance
Before and after each use: Check the
o
product and accessories for wear and
damage. If required, replace worn or
damaged accessories. Observe the
technical requirements (see "Technical
data").
Check covers and safety devices for sound
o
condition and correct installation. If that is
not the case, have them replaced by an
and
5 ] [
expert.
Change the sand paper
o
˜ Repair
This product does not contain any parts that
o
can be repaired by the user.
Contact an authorised service centre or
o
a similarly qualified person to have the
product checked and repaired.
˜ Replacement parts/
Accessories
Customers can obtain compatible
o
replacement parts and accessories via
www.optimex-shop.com.
Have the order number ready for your
o
order.
You can only place orders online.
o
Contact the Lidl service hotline (see
o
„Service") for further information.
.
2 ] [
down and away from the slot
[ ]
. Empty the dust box
2 ] [
[
regularly.
]