Scope Of Delivery/Accessories; Overview - Parkside Performance Psspa 20-Li D3 Originalbetriebsanleitung

GB MT
• Sawing straight and curved cuts as well
as mitre cuts (only wood and plastic) of
up to 45°
• Only operate in dry areas.
Please note the information on saw blade
types.
Any other use that is not expressly permit-
ted in this instruction manual may pose
a serious hazard to the user and result in
damage to the device. The operator or
user of the machine is responsible for any
accidents or personal injury and/or mater-
ial damage to third parties or their prop-
erty. The machine is intended to be used
by do-it-yourselfers. It was not designed
for heavy commercial use. The warranty
is void in the case of commercial use. The
manufacturer is not liable for damage
caused by improper use or incorrect oper-
ation.
The device is part of the X 20 V TEAM
series and can be operated with bat-
teries of the X 20 V TEAM series. Bat-
teries of the X 20 V TEAM series may
only be charged using chargers of the
X 20 V TEAM series.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material prop-
erly.
• Cordless Jigsaw 20V
• 2 Wood saw blade HCS swiss made
• 1 Metal saw blade BIM swiss made
• Splinter guard (pre-assembled)
• Line guide adaptor (pre-assembled)
• Guard cover (pre-assembled)
• Suction nozzle (pre-assembled)
• Reducer piece (pre-assembled)
• Parallel guide
• Storage case
26
• Translation of the original instructions
Battery and charger are not in-
cluded.

Overview

The illustrations for the
device can be found on
the front and back fold-out
page.
1 Auxiliary handle (Insulated gripping
surface)
2 On/Off switch
3 Unlock button
4 Handle (Insulated gripping surface)
5 Control panel
6 Lever
7 Switch (dust blower function)
8 Battery holder
9 Battery (not included)
10 Reducer piece
11 Adapter for external dust extraction
12 Footplate
13 Pendulum stroke switch
14 Release (Chuck)
15 Guide roller
16 Wood saw blade
17 Metal saw blade
18 Mount (Parallel guide)
19 Line guide adaptor
20 Retaining screw
21 Chuck
22 LED work light
23 "Connected" indicator
24 Charge level indicator on the tool
25 Stroke rate display
26 Stroke rate button
27 Overtemperature display