Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MaInTenanCe and CleanInG
9.1
10
with the original base unit and can be fitted accordingly. Therefore the working width can
be effectively adjusted in line with the application required. Small floors or areas with dif-
ficult access can be effectively blast cleaned with a single module just as large areas can
be blasted with a double module system.
Additional / exchange parts for the shotblaster EU
EU = Extension Unit
Parts
Additional parts
Replacement
parts
Wear & Tear parts
Maintenance and Cleaning
Part
Bearings
Joints and
Height adjustment
Belt drive
Cleaning
Description
– Attachment of the shot control lever of the blasting agent.
– Bracket for hose feed-through
– Separating panelling.
– Rear wheel suspension.
– Rubber skirts / strip around magnet frame.
– blast wheel
– shot cage
– Inner linings
– Magnetic frame
– Back skirt
– Magnetic frame
– Bracket for the back skirt
– Back skirt
– Rubber sealing for the magnetic frame
– Brush
– Shot stop
– Blast wheel cover
– Shot hose
– Poly-V belt of the turbine
– Poly-V Pulleys of the turbine.
– Turbine
Description
– All ball bearings are lubricated for life.
– All joints must be lubricated periodically with commercially
available machine grease.
– The belts must be checked at intervals of approximately 30
operating hours and replaced if necessary.
– Regular cleaning of the machine increases the service life of
all machine components and tools.
19
Werbung
