6
1.2
• Noise protection equipment must be worn by the machine operator. If the noise level exceeds
90 dB(A), the operator must wear noise protection equipment.
• Eye protection must be worn by the machine operator.
•
Safety shoes with steel toecaps must be worn by the machine operator.
Caution!
The shot blasting machine must be operated with an extraction system.
Depending on the type of floor and coating, gases/dust may be released during blasting.
It is the responsibility of the user to determine whether these gases/dusts may contain ha-
zardous substances and whether protective measures need to be taken.
Measures must be taken to keep the air clean especially when blasting floors containing
asbestos, for example. Suitable filters must be fitted in the extraction system.
Labels on the machine
1
A
40
30
20
10
5
TN
MODUL 200 XL
8
WARNING
!
10 s.
Vor dem Umschalten von
STERN auf DREIECK
mind. 10 Sekunden warten!
Before switching from
STAR to DELTA
wait at least 10 seconds!
Labels on the mobile Shotblaster
1 Ammeter.
2 EMERGENCY STOP button. Start switch- (START)
3 Disconnect the mains plug before opening the machine.
4 Warning of electrical voltage.
5 Wait! Wait at least 10 seconds before switching from STAR to DELTA.
6 Pull out the mains plug before opening the machine.
7 Green arrow - Blasting direction - Red arrow - Reverse to manoeuvre the machine.
8 Wait! At least 10 seconds before switching from STAR to DELTA.
9 Lever for dosage of the shot.
10 Red arrow - indicates the correct direction of rotation of the blast wheel
11 Read all information carefully. Safety goggles, ear defenders & safety shoes must be worn.
2
START
START
6
Vor Öffnen des Gerätes
Netzstecker ziehen
Before opening
disconnect mains
Avant d'ouvrir l'appareil
retirez la fichemâle
Antes de abrir el aparato
sacar el enchufe
CLOSE
ZU
9
AU F
O P E N
GeneRal SafeTy PReCaUTIOnS
3
CAUTION
!
Turn Off and
Unplug Before
Opening
7
10
11
4
s
e i
K r
r
ß e
e i
w
e n
i d
n e
c h
s s
a u