DeFelsko PosiTector 6000 Bedienungsanleitung Seite 7

Provides greater accuracy within a limited, defined range.
Measure known coating thicknesses that are thinner (often
zero) and thicker than the expected thickness range, in any
order.
The current
right corner of the display. A stored
selected when returning to a particular part. Cal 1 can be
adjusted but never deleted, and is always made active with
factory settings after a
cannot be created if a batch is open with readings present.
Create meaningful
using the onscreen QWERTY touch keyboard — helpful
when storing multiple
When enabled, calibration adjustments can be made using
the and buttons after taking a measurement.
Use when operating regularly on non-ferrous substrates.
The icon appears and the probe will only use the eddy
current principle to shorten measurement time and extend
battery life. Also useful when measuring coatings over plated
or partially magnetic grades of stainless steel.
When enabled, all Calibration Adjustment options are
locked, and the Lock icon
optional passcode can be created. To deactivate Cal Lock,
re-enter the passcode (if used); if forgotten, Cal Lock can
be disabled by Resetting the gage.
2
(Advanced models only)
(ex. Cal 3) is displayed in the upper
(pg. 6). A new
(FN ferrous/non-ferrous combination probes only)
will appear on the display. An
5
can be
names directly on the Gage
adjustments.