DeFelsko PosiTector 6000 Bedienungsanleitung Seite 13

For more information on USB Keyboard and
NOTE:
Streaming visit: www.defelsko.com/usb/stream
When enabled and connected to a computer, the PosiTector will
be recognized as a
computer as they are taken, emulating keystrokes, followed by
a carriage return.
The above
option. When selected, the Gage immediately synchronizes
stored measurement data via its respective communication
method (internet connection required). Alternatively, select
automatically synchroniz e upon connection to a PC. Additional
measurements added to memory while connected are
synchronized only when the USB cable is disconnected and
reconnected, or when the
connected gages automatically attempt synchronization
upon power-up.
NOTE:
Allows communication with a smart device running the
wireless technology.
Select batches to flag them for synchronization to the
PosiTector App.
new device to a gage with pre-existing batches, since only
batches created while
selected.
Selected batches are synchronized when the next reading is
taken in a batch flagged for synchronization, or when the
option is selected at the bottom of the list of selected
batches.
(Advanced models only)
and menus contain a
from within the
(Advanced models only)
(pg. 10) via auto-pairing
is useful when connecting a
11
. Readings are sent to the
connect menu to
option is selected.
is enabled are automatically
(BLE)