DeFelsko PosiTector 6000 Bedienungsanleitung Seite 4

Press the button or swipe right to return to a previous screen.
Select to close the Menu.
When powered-up, the
determines which probe is attached and does a self-
check.
To disconnect a probe from a body, slide the plastic
probe connector horizontally (in the direction of the
arrow) away from the body. Reverse these steps to
attach a different probe. It is not necessary to power-
down the Gage when switching probes.
The
types including magnetic, eddy-current, and ultrasonic coating
thickness, surface profile, environmental, hardness, salt
contamination, gloss, and ultrasonic wall thickness probes.
See www.defelsko.com/probes
When a Menu option is highlighted, the
icon indicates on-gage help is available.
Press or touch the
help. A formatted PDF containing all on-
gage help items is available at
www.defelsko.com/help
NOTE: Update your gage to ensure that
you have the latest on-gage help infor-
mation.
indicates that a sub-menu exists for the
Menu option. Select the option to display
its sub-menu.
gage body accepts a wide variety of probe
2
icon to display the
automatically