Installation Guide - Asviva R7 Benutzerhandbuch

INSTALLATION GUIDE

STEP 1
Attach the Front Stabilizer(7) and Rear
Stabilizer(14) to the Main Frame(36)
using Bolts(12) , Arc Washers(6) , Spring
washers(5) and Cap Nuts(13). Tighten
and secured with Wrench (B).
STEP 2
Connect Trunk wire 1(118)with Trunk
wire 2(119)well. Connect Left Handle
Pulse wire 3(122)with Left Handle Pulse
wire 2(121)well. Connect Right Handle
Pulse wire 3(125)with Right Handle Pul-
se wire 2(124)well, showed as Pic.
Attach the Handlebar Post(3) to the Main
Frame(36) using Bolts(4) , Arc Was-
hers(6) and Spring washers(5) . Tighten
and secured with Wrench (B).
31