Combinations Of Cutting Attachments And Deflectors; Spare Parts And Accessories; Disposal; Ec Declaration Of Conformity - Stihl Fsa 70.0 R Gebrauchsanleitung

English
– Control handle: 2.0 m/s²
– Loop handle: 4.9 m/s²
Use with a PolyCut 12-2 mowing head
– Sound pressure level L
ance with IEC 62841-4-4: 79 dB(A)
– Sound power level L
ance with IEC 62841-4-4: 91 dB(A)
– Vibration value a
hv
with IEC 62841-4-4
– Control handle: 2.0 m/s²
– Loop handle: 3.8 m/s²
The vibration levels indicated were measured
according to a standardized test method and can
be used as a basis for comparing electric power
tools. The vibration levels actually occurring may
vary from the values indicated, depending on the
type of application. The vibration levels indicated
can be used for an initial estimate of the vibration
load. The actual vibration load has to be estima‐
ted. The times can be taken into account in the
estimate when the electric power tool is switched
off and also when it is switched on but running
without any load.
For information on compliance with the Physical
Agents (Vibration) Directive 2002/44/EC, see
www.stihl.com/vib.
20.8 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
21 Combinations of Cutting
Attachments and Deflec‐
tors
21.1 STIHL FSA 70 R Brushcutter
The following mowing heads may be mounted
with the deflector:
– STIHL AutoCut C 12-2 mowing head:
– with round, low-noise mowing line with a
diameter of 2.0 mm or 2.4 mm
– PolyCut 12-2 mowing head
– with orange blades (330 mm diameter)
46
measured in accord‐
pA
measured in accord‐
wA
measured in accordance

21 Combinations of Cutting Attachments and Deflectors

22 Spare Parts and Accesso‐
ries
22.1

Spare parts and accessories

These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.

23 Disposal

23.1 Disposal of Brushcutter, Bat‐
tery and Charger
Contact the local authorities or your STIHL
dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
24 EC Declaration of Con‐
formity
24.1 STIHL FSA 70.0 R Brushcutter
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declares under our sole responsibility that
– Designation: Cordless brushcutter
– Machine category: Grass trimmer
– Manufacturer's brand: STIHL
– Model: FSA 70.0 R
– Serial number: FA07
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC and 2014/30/EU and
has been developed and manufactured in com‐
pliance with the following standards in the ver‐
sions valid on the date of production:
EN 55014‑1, EN 55014‑2, EN 62841-1 and ISO
0458-063-9801-A