G&D VisionXS-C-DP-UHR Installation Und Bedienung Seite 191

Resetting the netfilter rules
In the default settings, all network computers can access the system's IP address
(open system access).
With the Config Panel web application, you can create netfilter rules to control the
access. After a netfilter rule has been created, the open system access is deactivated
and all incoming data packets are compared to the netfilter rules.
The created netfilter rules can also be deleted with this function.
How to delete the created netfilter rules:
1. Open the remote OSD of the computer module by pressing
(default: Ctrl + Num
Open the local OSD of the console module by pressing the
(default: +
Alt Num
2. Select the row
3. Select the row
4. Confirm the security prompt or cancel the process.
) if you want to reset the settings of the extender system.
) if you want to reset the local settings of the console module.
Network and press Enter
Reset netfilter configuration
.
and press Enter .
G&D VisionXS-C-DP-UHR · 81
Configuration
remote hotkey
local hotkey