G&D VisionXS-C-DP-UHR Installation Und Bedienung Seite 171

Displaying information of channel auto-switching
IMPORTANT: The activation of the
to a second console module are prerequisites for this operation option.
For the case that the connection to the counterpart gets lost and there is an auto-
matic channel switch, you have the option of displaying information about the
channel auto-switching.
How to configure the information of channel auto-switching:
1. Press
Alt+Num
2. Select the row
3. Select the row
4. Enter the desired display duration from
can enter if you do not want any information to be displayed, or
0
(default) if the information should be displayed permanently or until the
OSD is used again.
5. Press F2 to save your settings.
Transm. Redundancy
(default) to open the OSD.
Console utility and press
Show auto-switching info and press
feature and the connection
Enter .
Enter .
5 to 99 seconds. Alternatively, you
G&D VisionXS-C-DP-UHR · 61
Configuration
perm