G&D VisionXS-C-DP-UHR Installation Und Bedienung Seite 170

Configuration
Configuration of channel auto-switching
IMPORTANT:
The activation of the
to a second console module are prerequisites for this operation option.
If the connection to the counterpart gets lost, the console module can automatically
switch to the other channel.
IMPORTANT: Since the console module is identified by the same UID on both tras-
mission channels, it is not permitted to connect both channels to the same counter-
part.
How to configure the channel auto-switching:
1. Press
Alt+Num
2. Select the row
3. Under Channel auto-switching
never
online
always
4. Press to save your settings.
F2
60 · G&D VisionXS-C-DP-UHR
Transm. Redundancy
(default) to open the OSD.
Console utility and press
press
 The channel accessed by the user is maintained in case of a
disconnection (default).
 If a connection is terminated, the device auto-switches to the
other channel if this channel has an active connection.
 If a connection is terminated, the device auto-switches to the
other channel regardless of the connection status of the other
channel.
feature and the connection
Enter .
F8 to select on of the following options: