G&D VisionXS-C-DP-UHR Installation Und Bedienung Seite 172

Configuration
Changing the exclusive mode aktionkey
IMPORTANT:
The activation of the
to a second console module are prerequisites for this operation option.
After pressing the hotkey for the exclusive operation of the extender the input
devices of the concurrent console are disabled. Only after pressing the hotkey again
at the active console the KVM extender can again be operated by both consoles.
The hotkey for the exclusive operation consists of at least one hotkey modifier (see
Changing hotkeys on page 57) and an exclusive key. Both keys can be selected from a
number of available keys. You can change both, the hotkey modifier
exclusive key .
Print
How to change the exclusive key:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under
Exclusive key
Backspace
Print
Scroll
Num
Pause
Insert
Delete
Home
End
PgUp
PgDn
Space
5. Press F2 to save your settings.
62 · G&D VisionXS-C-DP-UHR
Transm. Redundancy
(default) to open the OSD.
and press
System setup
Hotkey and press
press to select on of the following options:
F8
 Backspace key
 Print key (default)
 Scroll key
 Num key
 Pause key
 Insert key
 Delete key
 Home key
 End key
 Page Up key
 Page Down key
 Space key
feature and the connection
.
Enter
Enter .
Ctrl and the