GreenWorks GD40BCB Bedienungshandbuch Seite 14

EN
Problem
Poor cutting perform-
ance
8 TECHNICAL DATA
Voltage
No load speed
Cutting head
Cutting line di-
ameter
Cutting path di-
ameter
Weight (without
battery pack)
Battery model
Charger model
Grass trimmer
Brush cutter
96 dB. Noise value. (Grass trimmer)
XX
101 dB. Noise value. (Brush cutter)
Possible Cause
Cutting blade incorrectly fitted
Cutting guard encrusted with debris
Cutting blade blunt
40 V
-1
6300 ±10%min (Grass trim-
-1
mer),6800 ±10%min (Brush cut-
ter)
Bump feed / Brush cutter blade
2 mm
356 / 406mm (Grass trimmer),
254mm (Brush cutter)
4.5 kg
G40B2, G40B25, G40B4, G40B5
and other BAF series
G40C, G40UC4, G40UC5,
G40X2UC8 and other CAF series
Measured L =78.4 dB(A),
PA
sound pressure K = 3 dB(A)
pA
level
Guaranteed L = 96 dB(A)
WA.d
sound power
level
Vibration <2.5 m/s
k=1.5 m/s
Measured L =82.8dB(A),
PA
sound pressure K= 3 dB(A)
level
Guaranteed L =101
WA.d
sound power dB(A)
level
Vibration <2.5 m/s
k=1.5 m/s
English
Solution
Remove cutting blade and refit in a fully central
position. Use guide rings on the blade to ensure
correct central alignment.
Clean inside of cutting guard
Flip/replace blade
9 WARRANTY
(The full warranty terms and conditions can be found
on Greenworks website www.greenworkstools.eu)
The Greenworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage)
from the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways then described
in the owner's manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
10 EC DECLARATION OF CONFORMITY
Name and address of the manufacturer:
Name:
Address:
Name and address of the person authorised to compile
the technical file:
2
,
2
Name:
Address:
Herewith we declare that the product
Category:
2
,
Model:
2
Serial number:
Year of Construction:
10
Globe Technologies Europe GmbH
Brunnenweg 17, 64331 Weiterstadt,
Germany
Ralf Pankalla
Brunnenweg 17, 64331 Weiterstadt,
Germany
String trimmer / Brush cutter
STF457 (GD40BCB)
See product rating label
See product rating label