GreenWorks GD40BCB Bedienungshandbuch Seite 12

EN
5.9 REMOVE THE BRUSH CUTTER
Figure 22 - 23.
Apply the guard to the blade.
1. Put the wrench in the specified angle
transmission hole.
2. Trun the blade and push the wrench until the
wrench engages the inner ring-nut hole, blocking
rotation.
3. Loosen the nut clockwise and remove the outer
cup.
4. Remove the outer ring-nut, blade, inner cup and
inner ring-nut. Do not remove the spacer from the
shaft.
6 TRANSPORTATION AND STORAGE
6.1 MOVE THE MACHINE
When you move the machine, you must:
• Wear gloves.
• Stop the machine.
• Remove the battery pack.
• Assemble the blade guard.
6.2 STORE THE MACHINE
• Remove the battery pack from the machine and
charge it.
• Make sure that children cannot come near the
machine.
• Keep the machine away from corrosive agents such
as garden chemicals and de-icing salts.
• Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine
for any damage.
WARNING
English
8