Hardware Installation - Seh Inu-50 Hardwareinstallationshandbuch

 Hardware Installation
Install the INU-50 on a top-hat rail (DIN rail according to DIN
EN 60715, 35 mm wide). You can directly connect up to two
USB devices to the INU-50. In addition, you can connect a
serial device to the RS485/RS422 interface.
clients
Important for optimal use:
The INU-50 must be aligned in a way that allows a
clearance of at least 3 cm to the ventilation
openings at the top and bottom.
To ensure efficient airflow for cooling, the INU-50
must be mounted vertically.
Adjacent high-power devices must maintain
sufficient distance from the INU-50.
Implement measures to prevent heat build-up in
the control cabinet.
13
network
USB devices
[en]
INU-50
RS-485/RS-422
Hardware Installation Guide
power 1
power 2