Installing The Filter - Dreame R20 Benutzerhandbuch

Avoid attempting to clean the filter with a brush or finger.
•

Installing the Filter

Insert the filter into the vacuum and gently press down.
•
Reinstall the dust cup.
•
Cleaning the Smart Multi-Surface Brush
Turn the lock counterclockwise to remove the brush roller.
•
Use scissors to cut off hairs and fibers, then wipe dust from the notch and
•
transparent cover.
When dirty, rinse the brush roller with clean water.
•
Stand the brush roller upright for at least 24 hours to dry.
•
Cleaning the Soft Roller Brush
Press the brush roller release button to remove it.
•
Use scissors to cut off hairs and fibers, then wipe dust from the notch and
•
transparent cover.
When dirty, rinse the brush roller with clean water.
•
Stand the brush roller upright for at least 24 hours to fully dry.
•
Cleaning the Motorized Mini-Brush
Use a coin to unlock and remove the brush roller.
•
Rinse and clean the brush roller.
•
Stand the brush roller upright to dry for at least 24 hours.
•
Reinstall following disassembly steps in reverse.
•
12