Use Instructions; Working Methods - Dreame R20 Benutzerhandbuch

Battery Status Display
The vacuum features a display screen showing the current battery level as a
•
percentage during charging. Once the number reaches 100, the battery is fully
charged.
LED Battery Status Indicator
During charging, the indicators blink white.
•
Once charging is complete, the indicators remain solid white.
•
Note: Upon reaching a full charge, the indicator will turn off after 5 minutes, and the
vacuum will automatically enter energy-saving mode.

Use Instructions

Working Methods

Choose between two working methods for the vacuum based on your preferences.
Discontinuous Cleaning Mode
Press and hold the vacuum's switch to activate this mode.
•
Release the switch to stop cleaning immediately.
•
Continuous Cleaning Mode (Trigger Switch Lock)
Activate Continuous Cleaning Mode by pressing the trigger switch lock.
•
Briefly press the on/off switch to keep the vacuum in Continuous Cleaning Mode.
•
Use the trigger switch lock to reduce finger fatigue from continuous switch
•
holding.
Note:
In Continuous Cleaning Mode, briefly press the on/off switch to pause or resume
•
operations without changing the vacuum's working mode.
Press the trigger switch lock again to exit Continuous Cleaning Mode.
•
Switching Suction Level
Press the button to toggle between auto and turbo suction levels.
•
In Turbo Mode, all fan-shaped icons will illuminate in white.
•
In Auto Mode, suction levels and the fan-shaped icon color change according to
•
the amount of inhaled dust.
Using Different Accessories
Smart Multi-Surface Brush
The smart multi-surface brush can be directly attached to the vacuum.
•
9