Silvercrest SDB 2400 F4 Kurzanleitung Seite 11

Steam ironing
1) Set the steam control 3 to the desired steam setting
( = no steam,
2) The temperature regulator 8 must be set to at least the
Otherwise no steam will be produced.
Ironing with steam blast
■ The steam blast function is especially suitable for smoothing difficult-to-reach
parts of a garment.
NOTE
The temperature regulator 8 must be turned to at least the setting range
►
. Otherwise no steam will be produced.
To generate the maximum quantity of steam, the temperature regulator 8
must be set to the highest level (MAX
1) Raise the steam iron slightly.
2) For a steam blast, press the steam blast button
3) You can also use the steam blast function to smooth hanging textiles.
VERTICAL
After use
■ Remove the plug from the mains power socket.
Empty the water tank and clean the sole of the iron q.
■
Place the cooled-down steam iron on the base 0.
■
Technical data
Supply voltage
Power consumption
■ 8 │ GB │ IE
= maximum steam).
Hold the iron vertically and press the steam blast button
220 – 240 V ∼ (AC), 50/60 Hz
2020 – 2400 W
setting.
).
4.
SDB 2400 F4
4.