two trees TS2 Bedienungsanleitung Seite 15

Note:
If you cannot find the correct port in the "Ports", you may need to
Method I: Click 'Tools" in the menu to install
software versions);
Method 2: Copy the "CH340ser. Exen file in the TF Card (USB flash disk) to the computer
install it.
I. After the laser head has been used for a period of time, it is necessary to clean the lens of
the light outlet under the laser head to ensure normal cutting
2. Wiping the lens must be done after the machine
hurt people
3. After wiping the lens, please dry it naturally
dry before powering it on, otherwise the light will cause the lens to break
4. You can watch the video tutorial by scanning
LightBurn INTRODUCTION
LightBurn is a charging but powerful engraving
official website https://LightBurnsoftware.com/
(TF card or USB flash disk supplied by the manufacturer
ntroduction: LightBurn is a layout, editing and control
With LightBurn, you can:
Import artwork in various common vector graphics
DXF, PLT, PNC, JPG, CIF, BMP)
-Powerful editing function (You can edit the graphics you want to carve)
LightBurn is a native application written for windows,
activated with a key for permanent use, with a trial period of 30 days)
Note: during the engraving process, the engraving
computer, and the engraving machine software
25
CH340 driver (This function is not available in some
ability
is powered off, otherwise the laser will
for about 3-5 minutes and wait for the lens to
the QR code of the manual
software, which can be downloaded on the its
also has an installation package)
software for laser engraving machine.
and image formats (Including A1, PDF, SVC,
Mac OS and Linux (But it needs to be
machine needs to be connected to the
cannot be closed.
REFERENCE
For engraving :
and
Electroplated
Powder
Anodic
Stainless
Density
Plastic
For Cutting :
P ywood
P ywood
p ywood 3mm
P ywood
P ywood
p ywood
Plywood
Acrylic I mm
Acrylic
Acrylic 6mm
Note:
The energy value is set to 500, and the laser intensity
The energy value is set to 1000, and the proportion
the energy, the faster the speed can be set.
The above parameters
adjust the parameter
OF MATERIALS
Material Speed (mm/min)
p ywood 6000
Acrylic 6000
Leather 6000
coating 1 ooo
coating
6000
alumina
6000
steel 3000
board 6000
Peddle 6000
board 6000
Cardboard 6000
Speed (mm/min)
Material
1 mm
600
2mm
280
4mm
200
5mm 150
6mm 100
7 8mm
100
500
3mm 200
100
accounts
of laser intensity
only for reference. Due to the different properties
values according to the actual situations.
EN
Power (%) Times
50
20
20
100
50
20
100
60
100
40
50
Power (%)
Times
100
100
100
100
100
100
100
100
1-2
for 50% of the power.
to power is 100%. The larger
of the materials, please
26