Sartorius 16420 Betriebsanleitung Seite 19

Fig. 13
Fig. 14
Password
Inputting a password (Fig. 13):
Default setting: 0
Minimum value: 0
Maximum value: 29999
The password can be a 5-digit number and it is entered using the selecting knob.
Password entry must be confirmed by re-pressing the selecting knob.
Entries visible for the user in the System menu are released by entering two freely-
selectable passwords. These levels are then accessible to all users without the further
need of entering a password. The following relationship exists between the respective
password and the entries in the System menu.
Password 1:
Password factory setting
Levels:
Password 2:
Password factory setting
Levels:
Note: If there is no agreement with the saved password and the password just
entered, the system automatically returns to the System menu.
After entering the password, the user can change the respective default password.
The following relationship exists between the password entered at the beginning and
the changes that can be made to the default passwords:
Changing password 1 (Fig. 14):
Default setting: 101
Minimum value: 0
Maximum value: 29999
The 101 default password can be changed in this menu.
Changing password 2:
Default setting: 202
Minimum value: 0
Maximum value: 29999
The 202 default password can be changed in this menu.
Note:
When entering password 2, the user also has the option of changing password 1.
101
Memory card, password,
Programs, display,
Operation, audio signals
202
Memory card, password,
Programs, display,
Operation, audio signals,
Date |Time, data recording, interfaces
Configuring the Sterisart Pump 19