BCP BL6-I06
Safety and operating instructions
Safety instructions
Warning
Read and understand all instructions.
Failure to follow all instructions listed below, may result in electric shock, fire
and/or serious personal injury.
Work Area
Keep your work area clean and well lit.
Cluttered benches and dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.
Keep tool dry.
Do not expose tool to rain. Do not use tool in damp or wet locations.
Electrical Safety
• Damaged cords may create a fire. Never use cord to carry the tool. Keep
cord away from heat, oil, sharp edges, or moving parts. Replace damaged
cords immediately.
Personal Safety
• Stay alert, watch what you are doing, and use common sense when operat-
ing a power tool. Do not use tool while tired or under the influence of drugs,
alcohol, or medication.
• A moment of inattention while operating power tools may result in serious
personal injury.
• Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts.
• Loose clothes, jewelry, or long hair can be caught in moving parts.
• Avoid accidental starting. Be sure switch is in the locked or off position be-
fore inserting battery pack.
• Carrying tools with your finger on the switch or inserting the battery pack
into a tool with the switch on invites accidents.
• Remove adjusting keys or wrenches before turning the tool on.
• A wrench or a key that is left attached to a rotating part of the tool may re-
sult in personal injury.
• Do not overreach. Keep proper footing and balance at all times.
• Proper footing and balance enable better control of the tool in unexpected
situations.
• Use safety equipment. Always wear eye protection.
EN
© Atlas Copco Industrial Technique AB - 9836 962600 00
Safety and operating instructions
3