Werbung
BCP BL6-I06
Speed setting unit during charging
Display light will flash on the SSU when placed in the charger.
1 LED green, battery is charging:
• glows: Battery pack full.
• blinks: Battery pack is being charged.
2 LED red, function:
• glows: Temperature too high/ low.
• blinks: Contact problems; battery pack defective.
Start the tool
Any time the trigger is pressed, the two high-intensity LEDs will light.
EN
© Atlas Copco Industrial Technique AB - 9836 962600 00
Service instructions
15
Werbung
