Werbung
BCP BL6-I06
• The power requested is too big. If the fault still appears,
contact our customer service
3 red flashing lights followed 5 yellow flashing lights:
• Battery voltage fault. The tool doe snot start or stops correctly.
• The fault means that the battery voltage is not appropriate for the voltage
announced in the tool. Make sure that the tool is adapted for the battery
used. If the battery used is correct=> contact our customer service
3 red flashing lights followed 6 yellow flashing lights:
• Overcurrent on the power circuit.The hardware limit has
been reached. The tool does not start or stops correctly
• If the fault still appears, the power stage is faulty =>
contact our customer service
EN
© Atlas Copco Industrial Technique AB - 9836 962600 00
Service instructions
19
Werbung
