G&D FIBREVision-MC4-ARU Installation Und Betrieb Seite 122

The video data that are transmitted from the computer to the computer module
(FIBREVision-CPU) are transferred to the monitor of the remote console with the
same timing. The signal's frequency and display position at the computer module
therefore correspond to those of the graphics output.
NOTE: While generating the video signal, some graphics cards differentiate
between digital and analog output. Such graphics cards generate digitally output
image signals with partly non-standardised timings. Such timings do not comply
with the monitor's default to reduce the frequencies of the digital signals.
Normally, this does not affect the FIBREVision system and the digitally connected
displays. Due to the non-standardised timing, analog monitors might not be able
to display the image size and the image position properly.
Further information
G&D FIBREVision · 49