Selecting The Usb Keymode - G&D FIBREVision-MC4-ARU Installation Und Betrieb

How to enable/disable the reinitialisation of USB devices:
1. Use the terminal emulator to establish the connection to the FIBREVision
system.
2. Use the arrow
3. Press the Space
cial keyboard:
Off  The connected USB input devices do not need to be
reinitialised (recommended setting).
All devices  All USB devices are regularly reinitialised.
Only faulty devices
If the communication with a USB devices is interrupted, the device
is reinitialised.
4. Press the S key to save your settings.

Selecting the USB keymode

NOTE:
The USB keymode can only be changed in the Setup menu.
The KVM extender supports all USB input devices listed on this page.
After you select a specific keymode, you can use the special features of various USB
input devices (see page 26).
 USB keyboards: In addition to the keys of standard keyboard layouts, the default
USB keymode PC Multimedia
With Apple or Sun Keyboards, you can apply special keymodes to use the special keys
of these keyboards.
The following table lists the supported USB keyboards:
INPUT DEVICE
PC keyboard with additional multimedia keys
PC keyboard with standard keyboard layout
Apple Keyboard with numeric keypad (A1243)
Sun Keyboard (German keyboard layout)
Sun Keyboard (American keyboard layout)
keys to select USB Auto Refresh
key (repeatedly) to enable or disable the support for a spe-
 The status of USB devices is monitored.
supports several multimedia keys like
Configuration
.
Loud
SETTING
 PC Multimedia
 PC Standard
 Apple A1243
 SUN German
 SUN US
G&D FIBREVision · 25
and Quiet .