Changing The Double Hotkey - G&D FIBREVision-MC4-ARU Installation Und Betrieb

Configuration

Changing the double hotkey

If the use of double hotkeys is enabled (see page 20), press the double hotkey and the
Backspace key simultaneously to start the setup mode FIBREVision system.
If an application program or another G&D device uses the same hotkey within the
cascade, the hotkey can be changed.
How to change the current double hotkey:
1. Requirement: enabling of the double hotkeys (see page 20).
2. Press Double Hotkey+Backspace
setup mode. If the hotkey delay is active, press the key combination for
seven seconds.
3. Press one of the setup keys listed below to activate the desired double hotkey:
 activates the double hotkey
Ctrl
Alt  activates the double hotkey
Alt Gr  activates the double hotkey
Win  activates the double hotkey
Shift  activates the double hotkey
1. Requirement: enabling of the double hotkeys (see page 20).
2. Use the terminal emulator to establish the connection to the FIBREVision
system.
3. Use the arrow
4. Press the
Space
Ctrl+Shift
Alt+Shift
Alt Gr+Ctrl
Win+Ctrl
Shift+Win
5. Press the S
Related topic:
 Using single or double hotkeys on page 20
22 · G&D FIBREVision
keys to select the row
key (repeatedly) to activate the desired double hotkey:
 activates the double hotkey
 activates the double hotkey
 activates the double hotkey
 activates the double hotkey
 activates the double hotkey
key to save the settings.
(default: Ctrl+Shift+Backspace
Ctrl+Shift
Alt+Shift
Alt Gr+Ctrl
Win+Ctrl
Shift+Win
Hotkey .
Ctrl+Shift
Alt+Shift
Alt Gr+Ctrl
Win+Ctrl
Shift+Win
) to activate the