Querying Firmware And Monitor Information (Getinventory); Rebooting The Kvm Extender (Doreboot) - G&D FIBREVision-MC4-ARU Installation Und Betrieb

Monitoring

Querying firmware and monitor information (GETINVENTORY)

The GETINVENTORY
KVM extender as well as information about the connected monitor.
Command:
<GETINVENTORY ReqID="123"/>
Exemplary answer of the KVM extender:
<INVENTORY Ver="1" ReqID="123">
<FirmwareLocal>1.2.3</FirmwareLocal>
<FirmwareRemote>1.2.3</FirmwareRemote>
<MonitorManufacturer>Samsung</MonitorManufacturer>
<MonitorModel>Syncmaster</MonitorModel>
<MonitorSerial>H9XP4711123</MonitorSerial>
</INVENTORY>
The following table lists the different fields as well as the possible states:
Field
FirmwareLocal
FirmwareRemote
MonitorManufacturer
MonitorModel
MonitorSerial

Rebooting the KVM extender (DOREBOOT)

Use the DOREBOOT
module.
Command:
<DOREBOOT ReqID="123"/>
Reply directly before the KVM extender is rebooted:
<REBOOT ReqID="123"/>
Reply if the command failed:
<FAIL ReqID="123"/>
46 · G&D FIBREVision
command can be sued to query the firmware revisions of the
Description
firmware version of the
computer module (CPU)
firmware version of the
user module (CON)
manufacturer of the monitor
model description of the monitor
serial number of the monitor
command to reboot the computer module as well as the user
Value
revision number
revision number
read-out data
of DDC
read-out data
of DDC
read-out data
of DDC