ECOVACS DEEBOT T30S COMBO Bedienungsanleitung Seite 36

No. Malfunction
After returning to the Station,
11 DEEBOT does not empty the
Dust Bin.
12 Fail to empty the Dust Bin.
The inner side of Dust Collection
13
Cabin is dirty.
Dust leakage occurs during
14
working.
EN 36
Possible Causes
The Auto-Empty function has not been turned on in
the ECOVACS HOME App.
Dust Bag is not installed in the Station.
Manually moving DEEBOT back to the Station might
not trigger Auto-Empty function.
In Do Not Disturb mode, DEEBOT will not empty the
dust after returning back to the Station.
The Station detects a decrease in empty efficiency.
If the above possible causes have been ruled out,
components of the Station may be abnormal.
The Station detects a decrease in empty efficiency.
The outlet of Dust Bin is blocked by foreign objects.
Fine particles are absorbed in the inner side of Dust
Collection Cabin through the Dust Bag.
The Dust Bag is broken.
The outlet of Dust Bin is blocked by foreign objects.
Solutions
Turn on the Auto-Empty function in the ECOVACS HOME App.
Install the Dust Bag, and close the Dust Collection Cabin .
It is recommended to let DEEBOT return to the Station on its own.
Please do not manually move it.
Turn off Do Not Disturb mode in ECOVACS HOME App or manually
start dust-emptying.
Replace the Dust Bag according to the
close the Dust Collection Cabin. If the Dust Bag is not full when
ECOVACS HOME App prompts, you can put it back again.
Please contact Customer Care for help.
Replace the Dust Bag according to the
close the Dust Collection Cabin. If the Dust Bag is not full when
ECOVACS HOME App prompts, you can put it back again.
Remove the Dust Bin and clean the foreign objects on the outlet.
Clean the inner side of Dust Collection Cabin.
Check the Dust Bag. Replace it.
Remove the Dust Bin and clean the foreign objects on the outlet.
[Maintenance] section and
[Maintenance] section and