ECOVACS DEEBOT T30S COMBO Bedienungsanleitung Seite 35

No. Malfunction
The following problems appear
when DEEBOT is working:
disordered cleaning route, deviation
from the cleaning route, repeated
cleaning, or missing of small
areas to be cleaned. (If there is
10 a large area that has not been
cleaned temporarily, DEEBOT will
automatically clean the missing
area. Sometimes DEEBOT will re-
enter a cleaned room, which may
not be a repeated cleaning, but
DEEBOT finding any missing area.)
Possible Causes
Objects such as wires and slippers placed on the
ground block the DEEBOT.
It may be that the Driving Wheels slip on the
ground when DEEBOT climbs steps, thresholds
and door bars, thus affecting its judgment of the
whole house environment.
Work on freshly waxed and polished floors or
smooth tiles, resulting in less friction between the
Driving Wheels and the floor.
Due to different home environments, some areas
cannot be cleaned.
The TrueMapping Distance Sensor is dirty or
blocked by foreign matters.
Solutions
Please tidy up the scattered objects on the ground such as wires,
slippers before cleaning. If there is any area missing, DEEBOT will
clean the missing area by itself, please do not interfere (such as
moving DEEBOT or blocking the route).
It is recommended to close the door of this area and clean the area
separately. After cleaning, DEEBOT will return to the starting location.
Please rest assured to use.
Please wait for wax to dry before cleaning.
Tidy up the home environment to ensure that DEEBOT can enter for
cleaning.
Wipe the TrueMapping Distance Sensor with a clean soft cloth or
remove foreign matters.
35 EN