Fronius Symo 3.0-3-S Serviceanleitung Seite 116

Inserting the Datamanager card:
116
(2) (1) (3)
Insert the new Datamanager card and
1
connect it to the Recerbo PC board
Datamanager Card:
Fit the Datamanager PC board with a
2
4x8 TX20 Taptite screw (3)
[1.2 Nm]
Use a flat spanner to fit the antenna (2)
3
[0.6 Nm]
Fit the 12-pin plug connector (1) to the
4
Datamanager PC board
Close the inverter and place it in the
5
wall bracket (see "Opening and closing
the device")
Datamanager Card 2:
Fit the Datamanager 2 PC board with a
2
4x9 TX20 Taptite screw (3)
[1.2 Nm]
Use a flat spanner to fit the antenna (2)
3
[0.6 Nm]
Fit the 16-pin plug connector (1) to the
4
Datamanager 2 PC board
Close the inverter and place it in the
5
wall bracket (see "Opening and closing
the device")