Fronius Symo 3.0-3-S Serviceanleitung Seite 110

(5)
Inserting the external fan:
(3)
110
(3) (6) (4)
Push both fan holders (5) outwards
7
and remove the external fan
NOTE! Ensure the flow of air is
into the device!
Allow the new external fan to engage in
1
the air guide
Position the air guide on the back of the
2
inverter
Thread in the fan cable, pushing in the
3
sealing plug (4) as you do so
WARNING! To ensure there are
no leaks, the sealing plug must be
securely in place
Allow the locking devices (6) on both
4
sides of the air guide to engage
Fit the air guide with two 5x14 TX25
5
screws (3)
[2.15 Nm]