Fronius Symo 3.0-3-S Serviceanleitung Seite 112

(5)
Inserting the external fan:
(3)
112
(3) (6) (4)
Push the fan holders (5) on both sides
7
outwards and remove the external fan
NOTE! Observe the direction of
the air flow in the device.
Allow the new external fan to engage in
1
the air guides
Position the air guide on the back of the
2
inverter
Thread in both fan cables, pushing in
3
the sealing plugs (4) on both sides as
you do so
WARNING! To ensure there are
no leaks, the sealing plug must be
securely in place
Allow the locking devices (6) on both
4
sides of the air guide to engage
Fit the air guide with two 5x14 TX25
5
screws (3)
[2,15 Nm]