Electrical Connection; Cleaning And Maintenance - Litecraft PowerBarX.15 Bedienungsanleitung

ELECTRICAL CONNECTION

Connection to the mains is only allowed by skilled persons.
•
Before connecting the fixture to the mains, assure that the specifications are corresponding.
•
Electrical grounding has to be used in the whole installation!
•
ATTENTION!
Installation has to be approved by an authorized person before first operation!

CLEANING AND MAINTENANCE

Installer has to take care of all safety and machinery installations are approved by skilled persons at least once
•
a year.
Installer has to take care of all safety and machinery installations are approved by authorized persons at least
•
every four years during the acceptance inspection. Following points need to receive special attention:
All screws used for mounting the fixture or parts of it need to be proof and must not show
•
corrosion.
Housing, Suspension device and installation site (ceiling, suspension, truss) must not show
•
deformation.
All power cords must not show any damage, aging (for example porous wires) or sediments.
•
Other, to the location related and usage aligned regulations will be observed by the skilled person
and safety defects will be fixed.
ATTENTION!
Make sure that the fixture is disconnected from mains during all maintenance! Is it important to unplug mains
connector!
The fixture must be regularly cleaned from dirt and dust. Only use a wetted, lint-free cloth for cleaning the
•
fixture. Never use alcohol or any kind of solvent for cleaning.
Inside the fixture there are no parts which need maintenance. Maintenance & service must be done by
•
authorized dealers only. Only use original spare parts!
Advice!
If you have further questions, your local dealer will be happy to help you.