Parkside PSSFS 3 A2 Bedienungs- Und Sicherheitshinweise Seite 36

˜ Troubleshooting
Error
The product does not work after
connecting between LNB and satellite
receiver .
The needle pointer
the highest value of the display scale
even after rotating the control knob
counter‑clockwise several times .
˜ Cleaning and care
m ATTENTION! Do not allow liquids to enter the product . Risk of product damage .
Do not use abrasive cleaning agents, cleaning alcohol or other chemical solutions
o
since these could damage the housing or even impair operation .
Use a dry, lint‑free cloth for cleaning .
o
The product is maintenance‑free . No components need to be maintained by you
o
inside the product .
Keep the product clean to ensure fault‑free operation .
o
34 GB/IE
keeps jumping to
6 ] [
1 ] [
3 ] [
Possible causes and solutions
Switch on the satellite receiver .
Check the LNB and satellite antenna
type . Insert an attenuation controller
(0 – 20 dB) between the LNB and the
product...
if the LNB is a high capacity type
o
with high amplification or
if the satellite antenna is larger than
o
1 metre .