Scheppach SM150L Originalbetriebsanleitung Seite 22

• Relevant accident prevention regulations and oth­
er generally recognized safety and technical rules
must also be adhered to.
• The machine may only be used, maintained or re­
paired by trained persons who are familiar with the
machine and have been informed about the dan­
gers. Unauthorized modifications of the machine
exclude a liability of the manufacturer for damages
resulting from the modifications.
• The machine is intended for use only with original
spare parts and original tools from the producer.
• The equipment is allowed to be used only for its pre­
scribed purpose. Any other use is deemed to be a
case of misuse. The user/operator and not the man­
ufacturer will be liable for any damage or injuries of
any kind resulting from such misuse.
• Please note that our equipment has not been de­
signed.
• For use in commercial, trade or industrial applica­
tions. Our warranty will be voided if the equipment is
used in commercial, trade or industrial businesses
or for equivalent purposes.
Residual risks
The machine is allowed to be used only for its intend­
ed purpose! Even when the equipment is used as pre­
scribed it is still impossible to eliminate certain resid­
ual risk factors. The following hazards may arise in
connection with the machine's construction and layout:
• Contact with the grinding wheel where it is notcov­
ered.
• Catapulting of parts from out of damaged grinding
wheels.
• Catapulting of workpieces and parts of workpieces.
• Damage to hearing if essential ear-muffs are not
used.
• Lung damage if no suitable protective dust mask
is used.
• Health damage caused by hand-arm vibrations if
the equipment is used over a prolonged period or
is not properly guided and maintained.
• The use of incorrect or damaged mains cables can
lead to electrical injuries.
• Although having regarded all considerable rules
there may still remain not obvious remaining hazrds.
• Minimize remaining hazards by following the in­
structions in "Safety Rules", "Use only as author­
ized" and in the entire operating manual.
22 | GB
5. Safety instructions
General power tool safety warnings
m WARNING!
Read all safety warnings, instructions, illustra-
tions and specifications provided with this power
tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operat­
ed (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive at-
mospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while op-
erating a power tool. Distractions can cause you
to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet. Nev-
er modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec­
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords in­
crease the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
www.scheppach.com