Werbung
USE
Operation controls
1
1
Power button (switch on/off device)
2
Decrease the fan speed
3
Display
4
Increase the speed
5
Light (on/off)
Power button
1.
After power on it will emit beeps and all indicators will light up for 1 second
and then go off. The appliance enters off mode.
2.
Short touch "on/off" icon, this icon will light up, and display shows "0", touch
"on/off" again, the appliance enters off mode.
3.
During the standby mode, there no any operation for 5 minutes, the appliance
also enters off mode.
Decrease/ Increase the speed
+
Touch
to increase the fan speed and
start with lowest speed to highest speed and the display shows 0-1-2-3-P. Under
the booster mode, the speed automatically changes to level 3 after 5 minutes.
Light button
After power on, 1st touch light icon, the lamp light up, touch again, the lamp light
off.
Setting the switch-off delay
When the fan is working, long press – icon for 3 seconds to set the fan to turn off
with a 5 minutes delay. The current speed shows in the display and on/off key
flashes. After 5 minutes, all indicators will light off and enters off mode. During
the delay mode, press the on/off button can turn off the fan, press + or – key can
change the speed and exit the delay function.
2
3
–
to decrease the speed. The fan speeds
4
5
EN
25
Werbung
