Ii - 7 Specifications For Turning - HEIDENHAIN ND 780 Handbuch

II - 7 Specifications for Turning

ND 780 Data
Axes
Encoder inputs
Subdivision factor
Display step
Display
Functions
Backlash Compensation
Error Compensation
Data interface
Accessories
Main power input
Operating temperature
Storage temperature
Degree of protection (EN 60529)
Weight
112
Up to 3 axes from A to Z, Z
0
Sinusoidal signals 11 µA , 1 V
PP
HEIDENHAIN encoders

Signal period:
2 µm, 4 µm, 10 µm, 20 µm, 40 µm, 100 µm, 10240 µm, 12 800 µm

Line count:
9000/18000/36000
Max. 1024-fold
Linear axes: 1 mm to 0.1µm
Rotary axes: 1° to 0.0001° (00°00'01"
Monochrome display for position values, dialogue, and input display, graphic
functions, graphic positioning aid

Status display:
Tool number, Operating mode, REF, inch/mm, scaling factor, feed rate, diameter
display Ø, stop watch, datum
REF reference-mark evaluation for distance-coded, or single reference marks

Distance-to-go mode, nominal position input (absolute, or incremental)

Scaling factor

HELP: On-screen operating instructions

INFO: Calculator, taper calculator, user, and operating parameters

10 datum point, 16 tools

Freezing tool position for back-off

Rotary encoder applications with ballscrews
Linear, and non-linear, up to 200 measuring points

Serial:
RS-232-C/V.24 300 to 115 200 baud
For output of measured values, and parameters;
For input of parameters, remote keys, and commands
Tilting Base, Tilting Bracket Assembly, Handle, Mounting Frame

AC 100 V ... 240 V (±10 %); 50 Hz ... 60 Hz (±3 Hz);
power consumption max. 135 W
0°C to 45°C (32 °F to 113 °F)
-20°C to 70°C (-4°F to 158°F)
IP 40 (IP 54 front panel)
2.6 kg
, Z
S
; input frequency max. 100 kHz for incremental
PP
II Technical Information