HEIDENHAIN ND 780 Handbuch Seite 189

1st step: Enter data
Press FEATURES soft key.
Press LINEAR PATTERN soft key.
PATTERN TYPE
Enter the type of pattern (Array). Cursor to the next
field.
FIRST HOLE X AND Y
Enter the X and Y coordinates (X = 20), (Y = 15).
Cursor to the next field.
HOLES PER ROW
Enter the number of holes per row (4).Cursor to the
next field.
HOLE SPACING
Enter the hole spacing (10).
ANGLE
Enter the tilt angle (18°).
ND 780
65