Werbung
CURE YOUR APPLIANCE
If a fault occurs, before calling the after-sales service, please ensure that
is not because of incorrect operations and refer to the fault table, attempt
to correct the fault yourself. You can often easily rectify technical faults
on the appliance yourself.
If a dish does not turn out exactly as you wanted, you can find many tips
and instructions for preparation at the end of the operating manual.
Fault
The appliance
does not work.
Knobs have
fallen out of the
support in the
control panel.
Knobs can no
longer be turned
easily.
Fan does not work all the time in the
mode: "Fan Heating"
WHEN NEEDED
Possible Cause
Faulty fuse.
Power cut
Knobs
have been
accidentally
disengaged.
There is dirt
under knobs
EN-33
Notes/remedy
Check the circuit breaker in the fuse box.
Check whether the kitchen light or other
kitchen appliances are working.
Knobs can be removed.
Simply place knobs back in their support
in the control panel and push them in so
that they engage and can be turned as
usual.
Knobs can be removed.
To disengage knobs, simply remove
them from the support.
Alternatively, press on the outer edge of
knobs so that they tip and can be picked
up easily.
Carefully clean the knobs using a cloth
and soapy water. Dry with a soft cloth.
Do not use any sharp or abrasive
materials.
Do not soak or clean in the dishwasher.
Do not remove knobs too often so that
the support remains stable
This is a normal operation due to the
best possible heat distribution and best
possible performance of the oven.
12
Werbung
