Herunterladen Diese Seite drucken

Midea 7NF30TOBL Gebrauchsanleitung Seite 57

Werbung

Caution!
If you open the appliance door during an on-going operation, the
operation will be paused. Please be especially careful with the risk of
burns.
Notes
1. To defrost big portions of food, it is possible to remove the side-
racks and place the container on the cavity floor.
2. To warming tableware, it is beneficial to remove the side-racks
and the heating modes "Hot Air Grilling" and "Fan Heating" with
temperature setting of 50°C are useful. "Hot Air Grilling" should
be used, if more than half of the cavity floor is covered by the
tableware.
3. Due to an optimum evenness of heat distribution inside the cavity
during "Fan Heating", the fan will work at certain times of the
heating process, to guaranty the best possible performance.
Cooling fan
The cooling fan switches on and off as required. The hot air escapes
above the door.
Caution!
Do not cover the ventilation slots. Otherwise, the appliance may
overheat.
To make the appliance cools down more quickly after the operation,
the cooling fan may continue to run for a period afterwards.
EN-17

Werbung

loading