The dimensions attached are in mm.
It is necessary to have the plug accessible or incorporate
a switch in the fixed wiring, in order to disconnect
the appliance from the supply after installation when
necessary.
Warning: The appliance must not be installed behind a
decorative door in order to avoid overheating.
Once the oven has been lifted into place inside the
appliance housing, locate the two holes in the casing of
the oven and fix it into place using
▲
CAUTION
Do not over tighten the screws
the oven or appliance housing - use a screwdriver only!
1
x 2
1
to avoid damage to
1
EN-11
3
1
2
2
x 2
,
and
.
2
3
3
x 2