Philips SCF301 Bedienungsanleitung Seite 6

well ventilation and heat
dissipation condition.
Caution
• The product should not
be left unattended when
plugged into a power
socket.
• Never drop or insert any
foreign object into any
opening or the silicone
tube.
• Do not shorten the
silicone tube.
• Before you connect
the breast pump to
the power, make sure
that the voltage of the
product corresponds to
the local power voltage.
• Wash, rinse, and sterilise
the appropriate pump
parts before each use.
• Do not use antibacterial,
abrasive cleaners,
or detergents when
cleaning breast pump
parts.
• Never put the breast
pump motor in water
or steriliser, as you
can cause permanent
damage to the pump.
English
8
• If the vacuum generated
is uncomfortable or
cause pain, switch off the
breast pump, break the
seal between the breast
and the pump funnel
with your finger, and then
remove the pump from
your breast. You can
also pull off the silicone
tube from the motor or
the cap to release the
vacuum.
• Do not continue
pumping for more than
five minutes at a time if
no result is achieved.
• Never use any
accessories or parts from
other manufacturers
or that Philips Avent
does not specifically
recommend. If you use
such accessories or
parts, your guarantee
becomes invalid.
• Do not use the breast
pump if the silicone
diaphragm appears to
be damaged or broken.
Replace the silicone
diaphragm. See chapter