Philips SCF301 Bedienungsanleitung Seite 11

» The expression indicator lights
up instead of the stimulation
indicator.
Note
•
Do not worry if your milk does
not flow immediately. Relax and
continue pumping. The first few
times you use the breast pump,
you may need to use a higher
expression mode to get your milk
flowing.
•
Stimulation and expression
levels match to the number of
the flowers lighting up. That is,
1 flower lighting up means level 1,
and 2 flowers lighting up means
level 2.
•
When needed, you can also
use stimulation mode to do
expression.
6
During expression, you can
switch between the stimulation
mode and expression mode by
pressing the mode selection
button ( ) for better expression.
(Fig. 17)
Note
• You do not need to use all
stimulation/expression levels,
only use the levels that are
comfortable for you.
• Place the pump motor on a
stable and flat surface, or hang
up steadily with the included
sling, to avoid any accidental
drops when in use. If not, this
may pull the pump body off from
the breast and cause injury.
•
If you regularly express more
than 125ml per session on each
breast, you can use a 260ml/9fl
oz Philips Avent bottle to prevent
overfilling and spillage.
•
If there is no operation on this
appliance (such as pause, change
stimulation level and expression
level) for 30 minutes (including
in pause), the appliance will shut
down automatically.
7 When you have finished
expressing, press the power
button ( ) to switch off the
breast pump and carefully
remove the pump body from
your breast.
Tip
•
After switching off the breast
pump, break the seal between
the breast and the pump funnel
with your finger, and then remove
the pump from your breast.
8 Disconnect the the power plug
to the power socket, and then
disconnect the power adapter
from the pump motor. (Fig. 18)
English
13